Skip Navigation
Skip to contents

Journal of Powder Materials : Journal of Powder Materials

OPEN ACCESS
SEARCH
Search

Author index

Page Path
HOME > Browse Articles > Author index
Search
Hyun-Seon Hong 2 Articles
Current Technology Trends Analysis on the Recovery of Rare Earth Elements from Fluorescent Substance in the Cold Cathode Fluorescent Lamps of Waste Flat Panel Displays
Leeseung Kang, Dongyoon Shin, Jieun Lee, Joong Woo Ahn, Hyun-Seon Hong
J Powder Mater. 2015;22(1):27-31.   Published online February 1, 2015
DOI: https://doi.org/10.4150/KPMI.2015.22.1.27
  • 16 View
  • 0 Download
AbstractAbstract PDF

Flat panel display devices are mainly used as information display devices in the 21st century. The worldwide waste flat panel displays are expected at 2-3 million units but most of them are land-filled for want of a proper recycling technology More specifically, rare earth metals of La and Eu are used as fluorescent materials of Cold Cathode Flourscent Lamp(CCFL)s in the waste flat panel displays and they are critically vulnerable and irreplaceable strategic mineral resources. At present, most of the waste CCFLs are disposed of by land-filling and incineration and proper recovery of 80-plus tons per annum of the rare earth fluorescent materials will significantly contribute to steady supply of them. A dearth of Korean domestic research results on recovery and recycling of rare earth elements in the CCFLs prompts to initiate this status report on overseas research trends and noteworthy research results in related fields.

Coating of Cobalt Over Tungsten Carbide Powder by Wet Chemical Reduction Method
Hyun-Seon Hong, Jin-Ho Yoon
J Powder Mater. 2014;21(2):93-96.   Published online April 1, 2014
DOI: https://doi.org/10.4150/KPMI.2014.21.2.93
  • 41 View
  • 2 Download
  • 2 Citations
AbstractAbstract PDF

Cobalt coated tungsten carbide-cobalt composite powder has been prepared through wet chemical reduction method. The cobalt sulfate solution was converted to the cobalt chloride then the cobalt hydroxide. The tungsten carbide powders were added in to the cobalt hydroxide, the cobalt hydroxide was reduced and coated over tungsten carbide powder using hypo-phosphorous acid. Both the cobalt and the tungsten carbide phase peaks were evident in the tungsten carbide-cobalt composite powder by X-ray diffraction. The average particle size measured via scanning electron microscope, particle size analysis was around 380 nm and the thickness of coated cobalt was determined to be 30~40 nm by transmission electron microscopy.

Citations

Citations to this article as recorded by  
  • Pre-treatments of initial materials for controlling synthesized TaC characteristics in the SHS process
    Jae Jin Sim, Sang Hoon Choi, Ji Hwan Park, Il Kyu Park, Jae Hong Lim, Kyoung Tae Park
    journal of Korean Powder Metallurgy Institute.2018; 25(3): 251.     CrossRef
  • Spark plasma sintering of WC–Co tool materials prepared with emphasis on WC core–Co shell structure development
    Sungkyu Lee, Hyun Seon Hong, Hyo-Seob Kim, Soon-Jik Hong, Jin-Ho Yoon
    International Journal of Refractory Metals and Hard Materials.2015; 53: 41.     CrossRef

Journal of Powder Materials : Journal of Powder Materials